Monday, January 21, 2013

How to use DDPB using wifi

I have saw alot of post about how to use DDPB through your wifi and not a USB cable. So here's a quick tutorial on how to do it.

These are the steps :

1. Put PB in Developer Mode.

2. Find IP Address of the Playbook (NOT the IP in Developer Mode starting with 192.168.x.xxx - Go to Settings -> about - > network and find IPv4 Address )

3. Open DDPB installer, add files, check the ones you want to Install

4. Enter Playbook's IP address & Password

5. Click on Install....

6. Enjoy

2 comments:

  1. thanks worked great
    my charge port broke so this was a big help

    ReplyDelete
  2. Wait I don't get it. After you find the layboo wirelessly what do you do on DDPB no IP is scanned?

    ReplyDelete